Favorite Stores
Showing posts with label FTU. Show all posts
Showing posts with label FTU. Show all posts
Thursday, November 1, 2018
Around the Sea
Around the Sea
AROUND THE SEA Yuri201801 and Kajenna201802
This tutorial was written by Shell on October 31st, 2018
Any resemblance to any other tutorial is a coincidence.
All my tutorials this included is for non profit and personal use only.
You may share a link with your groups to my tutorial but please do not share my supplies.
This tutorial is written in PSP9 but should work in other versions. This tutorial also assumes you have a working knowledge of PSP.
This tutorial was written by me, and any resemblance to any other tutorial is completely coincidental.
Save your work often!
Supplies Needed:
Scrapkit by Zlata_M Blue Sea HERE
Masks by Vivienne's Paintbox Mask_DFly_0018 HERE and Keep open in PSP
Tube Clarissa by Yuki from PFD HERE
This is one of their exclusive tubes and you have to join their Exclusive Club to get this tube, however you can use any tube you wish.
Fonts I used:
Copy write Pixelette size 8
Name The Travelista HERE
Open Mask and Minimize in your PSP
Open Template 13 by Simply Made by Shell
Ctrl + D to duplicate the template and then close the original.
Highlight Large Black Circle Layer
Selection - Select All - Selection Float - Selection Defloat
Layers - New Raster Layers
Highlight the New Raster Layer you just made
Open Paper 3 from the scrapkit or a paper of choice
Edit - Copy the paper of choice
Edit - Paste - Paste into Selection
Image - Rotate - Free Rotate Settings Direction : Right Degrees : 90
Selection - Select None
Highlight Large Black Circle Layer again and go to Layers - Delete
Highlight Black Wavy Lines Layer
Selection - Select All - Selection Float - Selection Defloat
Layers - New Raster Layers
Highlight the New Raster Layer you just made
Open Paper 6 from the scrapkit or a paper of choice
Edit - Copy the paper of choice
Edit - Paste - Paste into Selection
Selection - Select None
Highlight Black Wavy Lines Layer again and go to Layers - Delete
Highlight Grey Square Layer
Selection - Select All - Selection Float - Selection Defloat
Layers - New Raster Layers
Highlight the New Raster Layer you just made
Open Paper 4 from the scrapkit or a paper of choice
Edit - Copy the paper of choice
Edit - Paste - Paste into Selection
Image - Rotate - Free Rotate Settings Direction : Right Degrees : 180
Selection - Select None
Highlight Grey Square Layer again and go to Layers - Delete
Highlight Grey Stars Layer
Selection - Select All - Selection Float - Selection Defloat
Layers - New Raster Layers
I used color #F8C102, you can use whatever color you wish.
Highlight the New Raster Layer you just made.
Click on Flood Fill Tool - Go to Materials and Change your Background Color to the color I used or one of your own choosing
Click inside each star to color the inside of the star.
Selection - Select None
Highlight Grey Stars Layer again and go to Layers - Delete
Choose your tube. I am using the Tube by Yuki called Clarissa
Edit - Copy your tube - Edit - paste as a new layer
If your tube has several layers because you can choose clothes and hair etc. you will want to go to Edit - Copy Merged (allows you to copy the tube with the color choices you made) - Paste as New Layer.
Layers - Arrange - Move to top. This will put your tube no the top layer.
If you are using the same tube as I did use the following Resize settings.
Image - Resize - 50% and make sure Resize all layers is unchecked.
Resize tube a second time with settings:
Image - Resize - 75% and make sure Resize all layers is unchecked.
Place bottom of tube even with the bottome of the Square.
Effects - Drop Shadow - Settings V & H 2 - Opacity 50 - Blur 7.92 - Color Black
Using Elements from the Scrapkit of your choice Decorate your tag.
Or Use the following Elements from the Scrapkit I am using for this tutorial.
Highlight Circle Layer and Using Element 83 go to Edit - Copy - Edit - Paste - Paste as a new layer
Image - Resize by 75% and Move to the right side of the tag.
Effects - Drop Shadow - Settings V & H 2 - Opacity 50 - Blur 7.92 - Color Black
Highlight Boat Layer and Using Element 14 go to Edit - Copy - Edit - Paste - Paste as a new layer
Image - Resize by 75% and Place at the bottom of the boat.
Effects - Drop Shadow - Settings V & H 2 - Opacity 50 - Blur 7.92 - Color Black
Highlight Tube Layer and Using Element 15 go to Edit - Copy - Edit - Paste - Paste as a new layer
Image - Resize by 50% and Move to the of the Square in the middle of the Square.
Effects - Drop Shadow - Settings V & H 2 - Opacity 50 - Blur 7.92 - Color Black
Highlight Square Layer and Using Element 4 go to Edit - Copy - Edit - Paste - Paste as a new layer
Image - Resize by 50% and Move to Left side of the tag behind the tube.
Effects - Drop Shadow - Settings V & H 2 - Opacity 50 - Blur 7.92 - Color Black
Highlight Grass Layer and Using Element 59 go to Edit - Copy - Edit - Paste - Paste as a new layer
Image - Resize by 50% and Move to the back of the tube on top of the grass.
Effects - Drop Shadow - Settings V & H 2 - Opacity 50 - Blur 7.92 - Color Black
Highlight Wood Layer and Using Element 3 go to Edit - Copy - Edit - Paste - Paste as a new layer
Image - Resize by 50% and again Image - Resize by 50% and Move to the bottom of the wood.
Effects - Drop Shadow - Settings V & H 2 - Opacity 50 - Blur 7.92 - Color Black
Highlight Starfish Layer and Using Element 20 go to Edit - Copy - Edit - Paste - Paste as a new layer
Image - Resize by 50% and Move to the Right side of the tag.
Effects - Drop Shadow - Settings V & H 2 - Opacity 50 - Blur 7.92 - Color Black
Highlight the Top Layer and Using Element 19 go to Edit - Copy - Edit - Paste - Paste as a new layer
Image - Resize by 50% and Move to the top of the Circle Layer.
Effects - Drop Shadow - Settings V & H 2 - Opacity 50 - Blur 7.92 - Color Black
Highlight Bottom Layer and Using Paper 6 Edit - Copy - Edit - Paste - Paste as a new layer
Layer - New Mask Layer - Choose From Image - Choose Mask_DFly_0018 - Source Luminance checked.
Layer - Merge - Merge Group
On the following Layers (White Square - White Wavy Lines - White Stars - Large White Circle )
Add Noise by going to Adjust - Add Remove Noise - Add Noise Settings : Uniform - Monochrome checked - Noise 39%
On the Large White Circle Layer and White Square Layer add the following Drop Shadow
Effects - Drop Shadow - Settings V & H 2 - Opacity 70 - Blur 10 - Color Black
Effects - Drop Shadow - Settings V & H -2 - Opacity 70 - Blur 10 - Color Black
On the White Stars Layer and White Wavy Lines Layer add the following Drop Shadow
Effects - Drop Shadow - Settings V & H 2 - Opacity 70 - Blur 10 - Color Black
Hide Mask Layer by clicking on the Visibility Toggle which is the Eye button on the layers.
Highlight any layer but the Mask layer
Layer - Merge - Merge Visible
Layers - View - View All
You should now have 2 layers a Merged Layer and a Mask layer
Highlight Merged Layer and Image - Resize - 85%
Layers - Merge - Merge all layers
Go to Crop Tool using the following Settings Width - 636 Height 630 - Left 41 - Top 40 - Right 677 - Bottom 670. should give you an area we are going to crop. If you used a different scrapkit you will have to adjust your crop settings.
Double click on the tag and it will auto crop to your settings.
Image - Resize by 94% and make sure All Layers is checked this time.
Adjust - Sharpness - Sharpen
If you don't have the next setting it's ok. The newer PSP I heard do not come with it, then just use the sharpen.
Adjust - Brightness ad Contrast - Clarify with Strength of 2
Add copyright and Names on your tag.
Here is another example of this tutorial I made using a FTU Kit by Mizteeque HERE
to show that you can use any kit and tube.
Hope you enjoyed this tutorial.
Please feel free to email me with any questions.
Or if you make me a tag ( I love tags!)
shell.wright@gmail.com
Thursday, October 18, 2018
Happy Halloween FTU Scrapkit
Tuesday, October 9, 2018
Trick or Treat
Trick or Treat
This tutorial was written by Shell on October 8th, 2018
Any resemblance to any other tutorial is a coincidence.All my tutorials this included is for non profit and personal use only.
You may share a link with your groups to my tutorial but please do not share my supplies.
This tutorial is written in PSP9 but should work in other versions. This tutorial also assumes you have a working knowledge of PSP.
This tutorial was written by me, and any resemblance to any other tutorial is completely coincidental.
Save your work often!
Supplies Needed:
FaniaLove tube Little Pumpkin From Digital Art Heaven . You can get it HERE
EyeCandy 4000 gradient glow
You can use any scrapkit you would like I used the two below
Mizteeque Scrapkits Miz_HalloweenTown and Miz_JeepersCreepers because they belong to the same scrap artist you can use elements from both of them.
You can get them and the Mask HERE
Mizteeque Mask 3 you will find in the JeepersCreepers Scrapkit
Fonts
Credits I used Pixelette
Names I used Pumpkins Candles
Open New Image 700 X 700 Transparent
Flood fill tool > Fill with White
Rename layer White Background.Copy Element 25 from the Scrapkit Miz_HalloweenTown > Paste as a New Layer. Add EyeCandy 4000 Gradient Glow Settings > Basic Tab > Glow Width 3 - Soft Corners 25 - Overall Opacity 100 - Check Draw Only Outside Selection. Color Tab - White. Effect > 3d Effects > Drop Shadow V&H 2 Opacity 50 Blur 7.92.
Copy Element 14 from the Scrapkit Miz_HalloweenTown > Paste as a New Layer. Move over to the left of the Halloween Word Frame. Effect > 3d Effects > Drop Shadow V&H 2 Opacity 50 Blur 7.92.
Copy Element 28 from the Scrapkit Miz_HalloweenTown. > Paste as a New Layer. Image > Resize (shortcut Shift + S) 50%, make sure resize all layers is Unchecked. Image > Resize again 50% Place left of the Castle. Effect > 3d Effects > Drop Shadow V&H 2 Opacity 50 Blur 7.92.
Copy Element 20 from the Scrapkit Miz_HalloweenTown. > Paste as a New Layer. Image > Resize (shortcut Shift + S) 50%, make sure resize all layers is Unchecked. Place in front of the Tombstone slightly to the right, look at my tag for placement. Effect > 3d Effects > Drop Shadow V&H 2 Opacity 50 Blur 7.92.
Copy Element 13 from the Scrapkit Miz_JeepersCreepers. > Paste as a New Layer. Image > Resize (shortcut Shift + S) 50%, make sure resize all layers is Unchecked. Place on the Right side of Tag. Effect > 3d Effects > Drop Shadow V&H 2 Opacity 50 Blur 7.92.
Copy Element 3 from the Scrapkit Miz_JeepersCreepers. > Paste as a New Layer. Image > Resize (shortcut Shift + S) 50%, make sure resize all layers is Unchecked. Image > Rotate > Free Rotate > Settings : Direction Right > Degrees 90 > All Layers and Rotate single layers around canvas center both unchecked. Image > Mirror. Place on the Left side of Tag leaning against Tombstone. Effect > 3d Effects > Drop Shadow V&H 2 Opacity 50 Blur 7.92.
Copy and Paste your Tube as a New Layer. I am using the Tube by FaniaLove called Little Pumpkin. Image > Resize (shortcut Shift + S) 50%, make sure resize all layers is Unchecked. Effect > 3d Effects > Drop Shadow V&H 2 Opacity 50 Blur 7.92.
Copy Element 38 from the Scrapkit Miz_JeepersCreepers. > Paste as a New Layer. Image > Resize (shortcut Shift + S) 50%, make sure resize all layers is Unchecked. Image > Resize again 50% again and Image > Resize again 50% for the third time. Image > Mirror and Place on the Right side of tag leaning against Witches Hat. Effect > 3d Effects > Drop Shadow V&H 2 Opacity 50 Blur 7.92.
Copy Element 65 from the Scrapkit Miz_JeepersCreepers. > Paste as a New Layer. Image > Resize (shortcut Shift + S) 80%, make sure resize all layers is Unchecked. Attach to Word Art Frame. Add EyeCandy Gradient Glow Settings > Basic Tab > Glow Width 3 > Soft Corners 25 > Overall Opacity 100 > Check Draw Only Outside Selection. Color Tab > White. Effect > 3d Effects > Drop Shadow V&H 2 Opacity 50 Blur 7.92.
Layers > Arrange > Send to Bottom and then move up just above Raster 1.
Using your Eraser Tool settings : Shape - Square > Size - 40 > Hardness - 100 > Step - 25 > Density - 100 > Thickness - 100 > Rotation - 0 > Opacity - 100. Erase the top of the web so it looks like it is coming out of the Word Frame.
Copy Element 15 from the Scrapkit Miz_HalloweenTown. > Paste as a New Layer. Image > Resize (shortcut Shift + S) 50%, make sure resize all layers is Unchecked. Image > Resize 80%.Place in middle of tag on bottom. Effect > 3d Effects > Drop Shadow V&H 2 Opacity 50 Blur 7.92.
Copy Element 24 from the Scrapkit Miz_HalloweenTown. > Paste as a New Layer. Image > Resize (shortcut Shift + S) 50%, make sure resize all layers is Unchecked. Place against girls arm on the left side. Effect > 3d Effects > Drop Shadow V&H 2 Opacity 50 Blur 7.92.
Click on Raster 1 Layer
Layers > New Raster Layer > Rename Background 1
Selections > Select All
Copy Paper 4 from Miz_JeepersCreepers Scrapkit
Edit > Paste > Paste into Selection
Select None.
Open Mask 3 from Miz-JeepersCreepers and Minimize
Select Background 1
Layers > New Mask Layer > From Image
Settings : Source Luminance checked > Select your Mask 3 from Miz_JeepersCreepers > Invert Mask Data unchecked. Click OK
Layers > Merge > Merge Group.
Layers > New Raster Layer > Rename Background 2
Selections > Select All
Copy Paper 2 from Miz_JeepersCreepers Scrapkit
Edit > Paste > Paste into Selection
Select None.
Layers > New Mask Layer > From Image
Settings : Source Luminance checked > Select your Mask 3 from Miz_JeepersCreepers > Invert Mask Data unchecked. Click OK
Layers > Merge > Merge Group.
Image > Resize (shortcut Shift + S) 80%
Adjust Blur > Gaussian Blur > Radius 5
Delete Raster 1 Layer ( your white layer)
Layers > Merge > Merge Visible
Image > Resize (shortcut Shift + S) 90% All Layers checked.
Adjust > Brightness > Clarify > Strength of Effect 2
If you don't have Clarify then you can use the following.
Adjust > Sharpen > Sharpen More.
Add your copy write
I used Pixelette size 8 Black
Add EyeCandy 4000 Gradient Glow Settings: Basic Tab > Glow Width 3 > Soft Corners 25 > Overall Opacity 100 > Check Draw Only Outside Selection. Color Tab > Color F2A06A.
Effect > 3d Effects > Drop Shadow V&H 0 Opacity 50 Blur 5.
Image > Rotate > Free Rotate > Settings : Direction Left > Degrees 90 > All Layers and Rotate single layers around canvas center both unchecked.
Move to the left of your tag.
Add Names to your tag.
I used Pumpkins Candles size 48 Black
Add EyeCandy 4000 Gradient Glow Settings: Basic Tab > Glow Width 3 > Soft Corners 25 > Overall Opacity 100 > Check Draw Only Outside Selection. Color Tab > Color White.
Effect > 3d Effects > Drop Shadow V&H 2 Opacity 50 Blur 7.92.
I placed mine up by the SpiderWeb but place it where you like it best.
Your all done!
Hope you enjoyed this tutorial.
Saturday, October 6, 2018
Test post! New labels
Subscribe to:
Posts
(Atom)
Tutorial TOU
You are free to do as you wish the results of any tutorials as long as it is for non-profit purposes. Please do not hotlink to anything on this site, or direct link to downloads. Just use a link and send them to my blog. If you are making email stationery using my tutorials, please add a note and link in the footer of your stat, thanks. If you have any questions, feel free to: email shell.wright@gmail.com I reserve the right to change my TOU's as I please. So it wouldn't hurt to check back :)